Please use this identifier to cite or link to this item:
https://repo.snau.edu.ua/xmlui/handle/123456789/13527
Title: | Дослідження впливу плит перекриття на напружено-деформований стан двосхилої ґратчастої балки |
Other Titles: | Study of the influence of floor slabs on the stress-strain state of a double-slope lattice beam |
Authors: | Артамошина, Наталія Миколаївна Artamoshina, Nataliya Mykolaivna |
Keywords: | ґратчасті залізобетонні балки ребристі плити покриття напружено-деформований стан lattice reinforced concrete beams ribbed floor slabs stress-strain state |
Issue Date: | 2025 |
Publisher: | СНАУ |
Citation: | Факультет будівництва та транспорту ; наук. керівник О. С. Савченко |
Abstract: | Робота складається із змісту, загальної характеристики роботи та її кваліфікаційних ознак, огляд досліджень за обраною темою, розділів основної частини, висновки за результатами МКР. Загальна характеристика роботи містить актуальність, мету і значимість проведеного дослідження. Результати досліджень дозволяють на основі математичного моделювання ґратчастих залізобетонних балок з урахуванням обпертих на нею ребристих плит покриття отримати уявлення про їх напружено-деформований стан і довести закладений в балку запас міцності. Аналіз публікацій та досліджень встановив, що сучасні нормативні документи і методики розраховані на проектування ґратчастих балок покриття як окремих конструкцій, без врахування конструкцій покриття (плит і панелей) що на нею спираються. В основній частині обрано і описано конструкцію ґратчастої балки покриття, визначено розрахункову схему ґратчастої балки з визначенням жорсткосних параметрів елементів розрахункової схеми, виконаний розрахунок і визначені напруження в елементах розрахункової схеми і деформації її вузлів, обґрунтована розрахункова схема ґратчастої балки з урахуванням ребристих плит покриття, що спираються на ґратчасту балку, виконаний розрахунок отриманої розрахункової схеми і визначені напруження в елементах розрахункової схеми і деформації її вузлів, виконано порівняння результатів розрахунку за двома розрахунковими схемами. У висновках встановлено, що основні розбіжності в величинах напружень спостерігаються у верхній частині балки, де вона працює на стиск, і різниця в напруженнях при різних варіантів розрахункової схеми складає більше 70 %. В нижній частині балки, де вона працює на розтяг, розбіжності в результатах розрахунку складають близько 24%. |
Description: | The work consists of the content, the general characteristics of the work and its qualification features, an overview of research on the chosen topic, sections of the main part, conclusions based on the results of the MQW. The general description of the work contains the relevance, purpose and significance of the conducted research. The research results allow, based on mathematical modeling of lattice reinforced concrete beams, taking into account the ribbed covering slabs resting on them, to obtain an idea of their stress-strain state and to prove the safety margin built into the beam. The analysis of publications and studies has established that modern regulatory documents and methods are designed for the design of grid beams of the coating as separate structures, without taking into account the constructions of the coating (plates and panels) that rest on it. In the main part, the design of the lattice beam of the roof is selected and described, the calculation scheme of the lattice beam is determined with the determination of the stiffness parameters of the elements of the calculation scheme, the calculation is performed and the stresses in the elements of the calculation scheme and the deformations of its nodes are determined, the calculation scheme of the lattice beam is justified taking into account the ribbed plates of the roof, which are supported by the lattice beam, the calculation of the obtained calculation scheme is performed and the stresses in the elements of the calculation scheme and the deformations of its nodes are determined, and the calculation results according to two calculation schemes are compared. The conclusions show that the main differences in the values of stresses are observed in the upper part of the beam, where it works in compression, and the difference in stresses for different variants of the calculation scheme is more than 70%. In the lower part of the beam, where it works in tension, the differences in the calculation results are about 24%. |
URI: | https://repo.snau.edu.ua/xmlui/handle/123456789/13527 |
Appears in Collections: | Промислового та цивільного будівництва |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Артамошина_Савченко.pdf Restricted Access | 15,97 MB | Adobe PDF | View/Open Request a copy |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.