Please use this identifier to cite or link to this item: https://repo.snau.edu.ua/xmlui/handle/123456789/13968
Title: Формування мікроструктури цементного камня в присутності комплексних хімічних добавок
Other Titles: Formation of the microstructure of cement stone in the presence of complex chemical additives
Authors: Сопов, Віктор Петрович
Андрух, Сергій Леонідович
Sopov, Viktor Petrovych
Andruh, Serhiy Leonidovych
Keywords: цементний камінь
мікроструктура
мікропористість
cement stone
microstructure
microporosity
Issue Date: 2025
Citation: Сопов В. Формування мікроструктури цементного камня в присутності комплексних хімічних добавок [Електронний ресурс] / В. Сопов, С. Андрух // Сучасне будівництво та архітектура. – 2025. – № 12.
Abstract: У цій статті експериментально досліджено можливості технологічного регулювання параметрів мікроструктури цементного каменю та бетону шляхом введення хімічних добавок різної природи. На основі досліджень впливу хімічних добавок на процеси гідратації цементу та мікроструктуру цементного каменю було проведено порівняльну оцінку твердіння та пороутворення цементного каменю з прискорювальними, пластифікуючими та комплексними добавками. Зокрема, дослідження зосереджувалося на впливі складних хімічних добавок, включаючи суперпластифікатор, такий як С-3 (ймовірно, на основі нафталінсульфонату) та LST (лігносульфонат) у поєднанні з хлоридними прискорювачами, такими як NaCl або KCl, на характеристики пороутворення під час твердіння двох типів цементу: портландцементу PC CEM I 42.5R та шлакопортландцементу SPC CEM II B-S 32.5 R. Ці цементи відрізняються своїм мінеральним складом, вмістом шлаку та, як наслідок, швидкістю гідратації та формуванням структури. Було встановлено, що цементний камінь, пористість якого характеризується мінімальним радіусом пор та оптимальним співвідношенням між об'ємами гелевих пор та капілярних пор, може бути досягнутий завдяки комплексному застосуванню прискорювача та пластифікатора. Синергетичний ефект суперпластифікатора, що знижує водоцементне співвідношення та покращує дисперсію частинок, поряд з хлоридним прискорювачем, що прискорює ранню гідратацію, сприяє цій покращеній структурі пор. Крім того, запропоновано новий підхід до оцінки ефективності модифікації структури цементного каменю, використовуючи коефіцієнт Kef, який визначається як співвідношення між об'ємами гелевих порта капілярних пор (співвідношення динамічних мікроструктурних показників). Ця кількісна інформація щодо мікроструктури цементного каменю та меж її регулювання під впливом внутрішніх та зовнішніх факторів дозволила сформулювати концепцію щодо можливостей досягнення заданих властивостей бетону шляхом модифікації відповідних параметрів мікропористості цементного каменю.
Description: This article experimentally investigates the possibilities of technological regulation of cement stone and concrete microstructure parameters through the introduction of chemical admixtures of various natures. Based on studies concerning the influence of chemical admixtures on cement hydration processes and cement stone microstructure, a comparative evaluation of the hardening and pore formation of cement stone with accelerating, plasticizing, and complex admixtures was performed. Specifically, the study focused on the impact of complex chemical admixtures, including a superplasticizer like С-3 (likely a naphthalene sulfonate-based type) and LST (lignosulfonate) combined with chloride accelerators such as NaCl or KCl, on the pore formation characteristics during the hardening of two types of cement: Portland cement PC CEM I 42.5R and slag Portland cement SPC CEM II B-S 32.5 R. These cements differ in their mineral composition, slag content, and consequently, their hydration rate and structure formation. It was established that cement stone, whose porosity is characterized by a minimal pore radius and an optimal ratio between the volumes of gel pores and capillary pores, can be achieved through the complex application of an accelerator and a plasticizer. The synergistic effect of the superplasticizer reducing the water-cement ratio and improving particle dispersion, alongside the chloride accelerator speeding up early hydration, contributes to this refined pore structure. Furthermore, a novel approach for evaluating the effectiveness of modifying the cement stone structure is proposed using the coefficient K ef , defined as the ratio between the volumes of gel pores and capillary pores (ratio of dynamic microstructural indices). This quantitative information regarding the cement stone's microstructure and the limits of its regulation under the influence of internal and external factors allowed for the formulation of a concept regarding the possibilities of achieving specified concrete properties by modifying the corresponding parameters of the cement stone's microporosity.
URI: https://repo.snau.edu.ua/xmlui/handle/123456789/13968
Appears in Collections:Статті, тези доповідей

Files in This Item:
File Description SizeFormat 
Опис статті другої.pdf833,02 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.