Короткий опис(реферат):
В основній частині наведено опис архітектурно-конструктивних та об'ємно-планувальних рішень будівлі, включаючи використані матеріали та конструкції. Предметом дослідження став впливу зміни жорсткості круглопустотної плити перекриття або перекриття на згинальні моменти які виникають в плитах, під час врахування сумісної роботи в них.
Результати досліджень показали, що ступінь руйнування плит не дозволяє використовувати досліджену методику i було прийнято рішення що-до заміни пошкоджених плит i інших елементів.
Аналіз публікацій та досліджень показує, що дана тема активно досліджується в багатьох країнах світу. Основна увага приділяється визначенню можливості відмови від підсилення або заміни пошкоджених або таких, що частково втратили несучу здатність, несучих конструкцій перекриття або покриття в процесі реконструкції або реставрації будівель та споруд. Аналіз також показує, що значна увага приділяється встановленню межі втрати несучої здатності елементів перекриття, при якій можливо відмовитися від підсилення або заміни конструкцій.
У висновках встановлено, що зміна жорсткості плити перекриття призводить до пропорційної зміни внутрішніх зусиль у ній. Зокрема, зменшення жорсткості будь-якої плити в складі диску перекриття веде до зменшення зусиль в цій плиті. Підведено підсумок щодо ступіню руйнування плит яка не дозволила використовувати досліджену методику i було прийнято рішення щодо заміни пошкоджених плит i інших елементів.
Також надані рекомендації щодо відновлення експлуатації будівлі.
Суть розробки, основні результати:
The main part provides a description of the architectural, structural and volume-planning solutions of the building, including the materials and structures used. The subject of the study was the influence of the change in the stiffness of the hollow core slab or floor on the bending moments that arise in the slabs, when taking into account the joint work in them.
The results of the studies showed that the degree of destruction of the slabs does not allow using the studied methodology and a decision was made to replace the damaged slabs and other elements.
An analysis of publications and studies shows that this topic is actively being studied in many countries of the world. The main attention is paid to determining the possibility of refusing to reinforce or replace damaged or partially lost load-bearing structures of the floor or coating during the reconstruction or restoration of buildings and structures. The analysis also shows that considerable attention is paid to establishing the limit of loss of load-bearing capacity of the floor elements, at which it is possible to refuse to reinforce or replace structures.
The conclusions established that a change in the stiffness of the floor slab leads to a proportional change in internal forces in it. In particular, reducing the stiffness of any plate in the floor disk leads to a decrease in the forces in this plate. A summary is given of the degree of destruction of the plates that did not allow the use of the studied method and a decision was made to replace the damaged plates and other elements.
Recommendations are also given for the restoration of the building.