Короткий опис(реферат):
Робота складається із змісту, загальної характеристики роботи, опису
архітектурно-конструктивних рішень, огляд досліджень за обраною
темою, розділів основної частини, висновки.
В РОЗДІЛІ 1 Загальна характеристика роботи сформульовано мету,
задачі, об’єкт та предмет дослідження та методи.
В РОЗДІЛІ 2 надана характеристика об’єкту де описано його об’ємно планувальне рішення.
В РОЗДІЛІ 3 виконано перевірочні розрахунки надійності захисного
сховища, розташованого на території шкільної будівлі.
В результаті проведених досліджень встановлено, що у фундаментній
плиті найбільші напруження виникають в центрі прольоту між опорами
(стіна, колона) Му становить -8,51 Т˟м/м., найбільші напруження у стінах
по вісі В в осях 2-8 Мх становить -11,21 Т˟м/м., найбільш напружена
колона – в осях 4 / А/2 зусилля N становить 129,8т, найбільші напруження
у плиті покриття виникають в місцях спирання плити на колони, зусилля
Мх становить 24,98 Т˟м/м.
Для запобігання продавлювання та зменшення напружень в плиті
перекриття в місцях спирання на колони влаштовують додаткове
армування.
Армування конструкцій виконується стержнями класу А240с, А500с.
прийнято бетон класу С20/25.
Суть розробки, основні результати:
The work consists of the content, general characteristics of the work,
description of architectural and structural solutions, review of research on the
selected topic, sections of the main part, conclusions.
In SECTION 1, the general characteristics of the work are formulated, the
goal, objectives, object and subject of the research and methods are
formulated.
In SECTION 2, the characteristics of the object are provided, where its
spatial and planning solution is described.
In SECTION 3, verification calculations of the reliability of the protective
storage located on the territory of the school building are performed.
As a result of the conducted research, it was found that in the foundation
slab, the greatest stresses arise in the center of the span between the
supports (wall, column) Mu is -8.51 T˟m/m., the greatest stresses in the walls
along the B axis in axes 2-8 Mx are -11.21 T˟m/m., the most stressed column
is in axes 4 / A/2, the force N is 129.8 t, the greatest stresses in the covering
slab arise in the places where the slab rests on the columns, the force Mx is
24.98 T˟m/m.
To prevent pushing and reduce stresses in the floor slab in the places where it
rests on the columns, additional reinforcement is arranged.
Reinforcement of structures is performed with rods of class A240s, A500s.
Concrete of class C20/25 is used.